banner

WIRELESS SMART GATEWAY

  • MD-S921 Outdoor LoRaWAN Gateway | 4G/Ethernet (PoE) Industrial IoT Hub with 3km Range

    MD-S921 Outdoor LoRaWAN Gateway | 4G/Ethernet (...

    ☑ Supports wireless 4G full Netcom communication;
    ☑ Supports Ethernet communication, supports POE power supply via network cable, no additional power wiring required;
    ☑ Under open and unobstructed conditions, the gateway coverage radius is no less than 3 kilometers;
    ☑ The gateway and terminals form a network via wireless LoRa, supporting access for no less than 256 terminals;
    ☑ Adopts a metal shell, suitable for long-term outdoor use;
    ☑ Simple installation, supports wall-mounted and pole-mounted installation;

  • MD-S903 Smart Protocol Converter | 4G/NB-IoT Industrial IoT Gateway with 8-Channel AI

    MD-S903 Smart Protocol Converter | 4G/NB-IoT In...

    ☑ Supports multiple WAN communication methods such as 4G/NB-IoT
    ☑ Supports LoRaWAN and custom LoRa
    ☑ Built-in industrial-grade real-time operating system with multi-task design
    ☑ 8-channel analog input, 8-channel digital input, supports 4-channel relay output development
    ☑ 2 RS485 communication interfaces, 1 RS232 communication interface (requires separate customization)
    ☑ Dual network card design for wireless and Ethernet, unique dual network card automatic switching technology
    ☑ Industrial-grade design, high reliability, operating temperature range -20℃~+65℃

  • MD-S906X Wireless Visual Smart Gateway

    MD-S906X Wireless Visual Smart Gateway

    ☑Large-size touch-screen operating system, easy to operate and easy to use Support 4G wide area network communication mode, LoRa wireless networking

    ☑Wireless and Ethernet dual network card design, unique dual network card automatic switching technology

    ☑Standard 485 communication interface, strong anti-interference ability

    ☑Standard system working status indicator

    ☑Industrial grade design, high reliability, wide operating temperature range

     

     

  • MD-S906 Industrial Edge Gateway | 4G & Ethernet IoT Data Logger with BLE, 8DI/8AI Inputs & CAN Bus

    MD-S906 Industrial Edge Gateway | 4G & Eth...

    ☑Support 4G WAN communication method

    ☑Support wireless networking, the networking protocol supports BLE form

    ☑Built-in industrial-grade real-time operating system, multi-task design

    ☑Standard 485 communication interface and CAN bus interface

    ☑Optional 8DI+8AI signal input, DI input supports dry contact signal

    ☑Wireless and Ethernet dual network card design, unique dual network card automatic switching technology

    ☑USB HOST interface, can read FAT32 format U disk

    ☑Industrial grade design, high reliability, operating temperature range -20”C~+80”C

  • MD-S905 Indoor LoRaWAN Gateway | 4G/Ethernet Industrial IoT Hub

    MD-S905 Indoor LoRaWAN Gateway | 4G/Ethernet In...

    ☑ Powered by AC 220V
    ☑ System status indicator lights
    ☑ Antenna interface uses high-performance SMA RF coaxial connector, facilitating on-site replacement of antennas with different gains
    ☑ Optional data upload methods: RS485, 4G, Ethernet
    ☑ Adopted sealed plastic housing with good protection performance

  • MD-S908 Gas Fire Suppression System Data Transmission Unit with 4G & Ethernet Remote Monitoring

    MD-S908 Gas Fire Suppression System Data Transm...

    ☑ Wireless 4G and Ethernet dual-network card communication design
    ☑ 32-channel digital input, supporting up to 135 pressure gauges
    ☑ Downlink: 2-channel RS485; Uplink: Ethernet and 4G
    ☑ Sound and light alarm
    ☑ Remote parameter setting and firmware upgrade
    ☑ Backup power supply DC24V

  • MD-S909P Industrial IoT Remote Terminal Unit (RTU) with 4G & Ethernet – 16-Channel DI & 8-Channel AI Data Acquisition Module

    MD-S909P Industrial IoT Remote Terminal Unit (R...

    ☑ Dual-network communication design: Wireless 4G and Ethernet
    ☑Input/output configuration:
     8 analog input channels
     8/16 digital input (DI) channels
     4 relay output channels
    ☑Communication interfaces:
     2 RS485 bus interfaces
     1 RS232 bus interface
    ☑Power failure alarm function

  • MD-S907 Industrial IoT Data Monitoring Controller | 4G/NB-IoT Remote Monitoring & Multi-Channel Control Device

    MD-S907 Industrial IoT Data Monitoring Controll...

    ☑ Compact size, dimensions 70×90×175mm
    ☑ Equipped with DIN rail clips for quick mounting
    ☑ Features multi-channel acquisition and 4-channel control functions
    ☑ Supports both 4G/NB and RS485 communication
    ☑ Equipped with operation status indicator lights